100V 20A Charge And 40A Discharge Machine For Battery Pack
Production Line Machine
Introduction:
The aging cabinet is mainly used for testing the charging and
discharging cycle of finished lithium battery pack.
Testing items include: battery charging protection voltage, discharging protection
voltage, capacity, etc.
Product characteristics:
♦ The voltage can be set at a maximum of 10-100V, charging current
0-20A, discharge current 0-40A
♦ At the same time, aging positive plate can protect negative plate
discharge protection
♦ By charging and discharge cycle of the battery, you can detect
whether the charging protection and discharge protection of the
battery are normal
♦ Charge and discharge cycle on the battery and record the charging
capacity and discharge capacity
♦ The equipment has anti-reverse protection function. The device
number is displayed through LED lamp, and the corresponding number
can be inquired at any time
♦ The instrument provides P + and P-interfaces, and CH + and CH-, can
test special finished batteries
♦ The equipment has a safe discharge current protection function
♦ PC computers can be connected through the serial port to reduce the
complexity of instrument use
♦ Network connection mode can be adopted, and the PC computer
terminal can control within 254 instruments by only providing one
network port
♦ The software system adopts a classic and mature C/S mode
♦ Communication modes have serial port and network mode equipment
with voltage upper and lower limit setting protection
♦ The serial port can realize the accurate communication of several
instruments for short distances
♦ The network can achieve long-distance multiple instrument
preparation communication
♦ The device can view the charge and discharge aging curve and export
the curve diagram
♦ In network mode, automatic online, no manual online
| Input Power | AC 380V 2kw 50/60Hz |
| Voltage | Measuring range | 10~100V |
| Precision | ±(0.2% of reading + 0.2% of range) |
| Electric Current | Charging range | 2~20A |
| Charging accuracy | ±(0.2% of reading + 0.2% of range) |
| Discharge range | 2~40A |
| Precision | ±(0.2% of reading + 0.2% of range) |
| Charging | Constant voltage cut-off current | (minimum)10mA |
| Capacity | Precision | ±1‰ |
| Power | Discharge power | 4000W |
| Time | Inspection time | <2S(Receive real-time & LT; 2s) |
| Timing range | 0 ~ 999 hours / Step |
| Data recording interval | ≥5S |
| Median version | 1.1 series |
| Charging | Charging mode | Constant current and constant voltage charging |
| Cut-off condition | Voltage, current, relative time, overcharge protection |
| Discharge | Discharge mode | Constant current discharge |
| Cut-off condition | Voltage, relative time, over-discharge protection |
| Circulates | Cyclic range | 1~999 |
| Single cycle number of steps | 100 |
| Voltage and current detection sampling | Four wire connection |
| Noise | <50dB |
| Database | Using My SQL database to manage test data |
| Communication Mode of upper computer | Based on TCP / IP Protocol, serial port |
| Data output mode | EXCEL,TXT,Chart |
| Communication interface | Mesh opening |
| Number of channels per cabinet | Single Channel |
| Case size | W*D*H:800MM*520MM*1370MM |
| Cabinet size | W*D*H:700MM*400MM*420MM |
FAQ
A: How can i install and operate the machine by myself?
B: Our system R&D based on intearated development viewwhen you
get the machine, just need to connect it with the electrical power,
then machine can be working. because the English software were
installed in thismachine.what you need to do is only learning the
software usage,and the complete English user manual will be coning
to you with the machine.
A: How to order?
B: Please send us your purchase order by email or call us salesor we
can make the proforma invoice under your request. We need to know
the following information for your order before sending your PI.
A: What's the warranty for the items?
B: We are very confident in our productsand we pack them very well, so
usually you will receive your order in good condition. any quality
issue,we will deal with it immediately.Warranty for equipment is a
year (24months) if the equipment parts are damaged due to non human
factors within one year, we will provide replacement parts free of
charge.
A: What scope does the product apply to?
B: Company 13 years committed to column Battery Pack Automation
Production Equipment, and column Battery Pack Automation Production
Line. Products are mainly used in digital batteries, energy storage
batteries, tool batteries,power batteries, automotive batteries,
etc.
